The Fairweather - Finger Spacer

Fairweather - Finger Spacer (excluding Tab)

  • Model:
  • 115701

The Fairweather Finger Spacer, to be used with the Fairweather Tab. You wont find a more comfortable spacer on the market!


Customers who bought this product also purchased


Fairweather -  Finger Spacer (excluding Tab)

Only the Finger Spacer, Tab and Plate need to be purchased separately, the finger spacer will fit all the Fairweather Tabs.

The spacer/ring is formed from medium/soft density urethane rubber and is formed as one complete covering of the spacer. You wont find a more comfortable spacer on the market!

Please purchase tab separately at Click Here

How to work out your sizing:   Sizing Tool available separately

First you’ll need to work out what size Spacer/Ring module you need. To do this first take a look at your middle finger.

You need to measure the thickest part of this finger. Some people have knuckles that are the thickest part of the finger, and in this case you’ll measure the knuckle. For others, the finger above the knuckle is thicker - so if thats the case for you then measure the finger above the knuckle.

So, take a 10mm wide strip of paper and wrap it the section of your finger that you need to measure.
Now mark across the paper strip at the point the end overlaps the loop with a pen . Straighten out the strip and measure the length between the marks where the overlaps were. This length* now can be compared with the chart to select your correct ring size. Generally if you are ‘between’ sizes then go for the smaller size.


When selecting the Spacer/Ring Size please refer to the chart below.


Spacer/ring size

Measured length*

17mm Ø


18mm Ø


19mm Ø


20mm Ø


21mm Ø


22mm Ø


23mm Ø


24mm Ø


25mm Ø