Beiter - Adapter Stabiliser Long Rod
As all Beiter products, the stabiliser was tested by top archers world-wide and used successfully in competitions, winning many titles and medals since its introduction 1996. Four carbon rods, positioned to form a square are held together by plastic blocks (called tuners) made of high quality thermosplasts and elastomers.
Tests have shown that the system is able to absorb more vibration, giving the archer less problems while aiming and performing the shot. The factory setting of the tuners avoids resonance in the system; the tuners themselves can be moved to offer the opportunity of an individual adaptation.
Beiter long rods are available with Endcap in following lengths: 26, 28, 30, 33, 35, 37, 41 and 45. According to their length these can be ordered with 2, 3, 4 or 5 tuners.
The stabiliser has a factory setting, but you may move the tuners, add or remove them as you wish. If you do this Beiters advice is to mark the original position of the tuners, in case the factory setting should be restored.
However, if you don't feel comfortable with the stabiliser you have tried, switch to a longer one with, possibly, more tuners. The popular tendency is to shoot with longer rods, with 3 or 4 tuners, with no weight in front.
Beiter stabilisers are available in a large variety of colour combinations.
If using the Beiter V-Bar you will also need to purchase the Beiter Adapter-Out 5/16-28mm separately.