Fairweather - Complete Tab

The Fairweather Finger tab comes with three pieces of leather, giving you the option of shooting either 2 or 3 pieces as you prefer, offering supreme comfort and durability.



£ 44.99




£ 19.99


£ 64.98

Pack description

Fairweather - Complete Tab

Comfortable and natural in the hand due to it being built from light weight Urethane plastic and Urethane rubber.

The tab comprises of two plates which lock the leather in place by ‘sandwiching’ the leather between them. This removes the need to apply multiple screws as in other tab designs.


The tab plates come in three sizes, Small, Medium and Large all with identical leather positioning pins thus allowing different size leathers to be used on the same plate.



The Fairweather tab is made from an extremely durable yet very soft Kangaroo leather for both the string face and backing. Each tab comes with three pieces of leather, giving you the option of shooting either 2 or 3 pieces as you prefer. Kangaroo leather allows for an excellent string feel and the uniform direction of the fibres in the leather offer more consistency on the shot.


It is recommend to wet the leather pieces with warm water when new and shooting the tab in, as this will help the leather take a set and speed up ‘shooting in’. The leather will dry out soon enough, but the fold that is left by the string will be much better formed than if left dry.

The Spacer/Ring attaches to the Middle Finger, and is available in 1mm incremental sizes from the smallest at 17mm to the largest at 25mm diameter. The spacer/ring is formed from medium/soft density urethane rubber and is formed as one complete covering of the spacer. 


Only the Finger Spacer, Tab and Plate need to be purchased separately, the finger spacer will fit all the Fairweather Tabs.

When selecting the Spacer/Ring Size please refer to the chart below.

Spacer/ring size

Measured length*

17mm Ø

56.5mm

18mm Ø

59.5mm

19mm Ø

62.5mm

20mm Ø

66.0mm

21mm Ø

69mm

22mm Ø

72.5mm

23mm Ø

76mm

24mm Ø

79mm

25mm Ø

82mm

 

Pack content

The Fairweather - Finger Tab (excluding spacer ring)

The Fairweather Finger Tab is made from light weight Urethane plastic and Urethane rubber.

The tab comprise of two plates which lock the leather in place by ‘sandwiching’ the leather between them. This removes the need to apply multiple screws as in other tab designs. Each tab comes with three pieces of leather, giving you the option of shooting either 2 or 3 pieces as you prefer. 

The tab plates come in three sizes, Small, Medium and Large all with identical leather positioning pins thus allowing different size leathers to be used on the same plate.



The Fairweather tab is made from an extremely durable yet very soft Kangaroo leather for both the string face and backing. Kangaroo leather allows for an excellent string feel and the uniform direction of the fibres in the leather offer more consistency on the shot.

It is recommend to wet the leather pieces with warm water when new and shooting the tab in, as this will help the leather take a set and speed up ‘shooting in’. The leather will dry out soon enough, but the fold that is left by the string will be much better formed than if left dry.

The Spacer/Ring attaches to the Middle Finger, and  is available in 1mm incremental sizes from the smallest at 17mm to the largest at 25mm diameter. The spacer/ring is formed from medium/soft density urethane rubber and is formed as one complete covering of the spacer. 

Please purchase the Spacer Ring separately at Click Here

Fairweather -  Finger Spacer (excluding Tab)

Only the Finger Spacer, Tab and Plate need to be purchased separately, the finger spacer will fit all the Fairweather Tabs.

The spacer/ring is formed from medium/soft density urethane rubber and is formed as one complete covering of the spacer. You wont find a more comfortable spacer on the market!

Please purchase tab separately at Click Here


How to work out your sizing:   Sizing Tool available separately


First you’ll need to work out what size Spacer/Ring module you need. To do this first take a look at your middle finger.

You need to measure the thickest part of this finger. Some people have knuckles that are the thickest part of the finger, and in this case you’ll measure the knuckle. For others, the finger above the knuckle is thicker - so if thats the case for you then measure the finger above the knuckle.

So, take a 10mm wide strip of paper and wrap it the section of your finger that you need to measure.
Now mark across the paper strip at the point the end overlaps the loop with a pen . Straighten out the strip and measure the length between the marks where the overlaps were. This length* now can be compared with the chart to select your correct ring size. Generally if you are ‘between’ sizes then go for the smaller size.

When selecting the Spacer/Ring Size please refer to the chart below.

Spacer/ring size

Measured length*

17mm Ø

56.5mm

18mm Ø

59.5mm

19mm Ø

62.5mm

20mm Ø

66.0mm

21mm Ø

69mm

22mm Ø

72.5mm

23mm Ø

76mm

24mm Ø

79mm

25mm Ø

82mm